PCB011L Automatic Changeover Switch, Honda EU30iS
Compact electronic changeover, manual start, automatic transfer.
Get Best Price- Model No.
- PCB 011L
- Compatible Genset
- Honda EU30iS
- Capacity
- 40 Amp Max, Single Phase
- Operating Voltage
- 160 to 280 VAC
The Subtech PCB011L is a compact electronic-circuit-base Automatic Changeover Switch for single-phase Honda EU30iS installations. You start the generator manually; the PCB011L takes over from there, automatically transferring the load between mains and generator and back, no manual switching needed.
What is the PCB011L Automatic Changeover Switch?
The Subtech PCB011L is a compact, electronic-circuit-base automatic changeover switch for single-phase Honda EU30iS installations, rated 40 Amp max at 160-280 VAC with double relay switching. You start the Honda EU30iS manually (via ignition or key), and the PCB011L automatically transfers the connected load between mains and generator supply, and back, without further manual switching. It uses IGN / GEN / MAIN / LOAD terminal pairs for wiring and includes an adjustable OLP (overload protection) generator-mode current setting.
Key Specifications at a Glance
Quick reference before you scroll through the full spec sheet
Why Choose PCB011L Automatic Changeover Switch, Honda EU30iS?
What actually matters when you put this on your line
Compact Electronic Circuit Base
Small footprint compared to a full AMF panel, suited to sites that only need automatic transfer, not automatic starting.
Adjustable Overload Protection
The OLP generator-mode setting can be tuned to the connected Honda EU30iS's actual running current.
Double Relay Switching
Two relays handle the mains/generator transfer for more reliable, longer-lasting switching than a single relay design.
Clear Terminal Layout
IGN, GEN, MAIN and LOAD terminal pairs make wiring straightforward for an installing electrician.
Lower-Cost Automation Step
A cost-effective way to automate the mains/generator transfer without paying for full auto-start functionality.
Honda EU30iS Matched
Voltage and current range specifically suited to the Honda EU30iS's single-phase output.
Description▾
Rated 40A max on a 160-280V single-phase supply with double relay switching, the PCB011L uses four labelled terminal pairs: IGN (ignition), GEN (generator), MAIN and LOAD, for a straightforward wiring layout. An adjustable OLP (overload protection) generator-mode setting lets it be tuned to the connected genset's actual current draw. It's the lower-cost automation step up from a fully manual changeover, for sites that already start the Honda EU30iS by hand but want hands-free transfer afterwards.
The Subtech PCB011L is a compact electronic-circuit-base Automatic Changeover Switch for single-phase Honda EU30iS installations. You start the generator manually; the PCB011L takes over from there, automatically transferring the load between mains and generator and back, no manual switching needed.
Additional Information▾
- Electronic circuit base, compact automatic changeover switch
- 40 Amp max capacity, single phase
- Double relay switching for reliable transfer
- Adjustable OLP (overload protection) generator mode setting
- IGN / GEN / MAIN / LOAD labelled terminal pairs
- Operating voltage 160 to 280 VAC
- Manual genset start; automatic load transfer thereafter
Technical Specifications
| Model No. | PCB 011L |
| Capacity | 40A Max |
| Phase | Single |
| Volts | 160 to 280 V |
| Relay | Double |
| For Generator | Honda EU30iS |
Who Should Buy PCB011L Changeover Switch?
This product is ideal for the following users and industries
Industrial Units & Factories
Manufacturing plants needing reliable auto-backup from a petrol generator when mains fail.
Agricultural & Farming
Farms, dairies and poultry needing critical loads to keep running on Honda gensets without manual switching.
Contractors & Builders
Site offices, construction zones and temporary installations needing hands-free backup.
Commercial Establishments
Hotels, hospitals, offices and shops needing uninterrupted operation during power cuts.
Applications & Use Cases
Where you can use PCB011L Changeover Switch effectively
Single-phase Honda EU30iS installations wanting automatic transfer without full AMF cost
Home and small-office backup where the genset is started manually
Retrofit automation for existing manual-start Honda EU30iS setups
Sites with an operator on hand to start the generator, but wanting hands-free switching
Frequently Asked Questions
Common questions about PCB011L Changeover Switch
Does the PCB011L start the generator automatically?▾
No, you start the Honda EU30iS manually (ignition or key). The PCB011L then automatically transfers the load between mains and generator, and back, without further manual switching.
What's the difference between this and the AMF Panel for Honda EU30iS?▾
The AMF Panel (Model SS534) auto-starts and auto-stops the generator as well as transferring load. The PCB011L only automates the transfer; you still start the generator yourself.
What is the warranty on the PCB011L?▾
12 months from date of invoice against manufacturing defects, covering all electronic components.
Can it be used with three-phase supply?▾
No, the PCB011L is rated for single-phase operation. For three-phase Honda EU30iS installations, see the AMF Panel for Honda EU30iS instead.
Is installation support available?▾
Yes. Our service team supports installation through certified electricians across India.
Downloads
Technical documentation for this model
Related Products
Related Technical Articles
- What Is a Motor Starter? Function, Types & Working
- AMF vs ATS: What's the Difference?Coming soon
Applicable Standards & Design Considerations
- Honda Power Products Authorised Partner: Subtech has been an authorised automation partner for Honda Power Products in India since 2007, designing and testing panels specifically for the EU30iS and EU65iS/EU70iS petrol inverter generator range.
- IS/IEC 60529: Enclosure ingress protection reference. Subtech's powder-coated GI panel enclosures are built for outdoor/site conditions typical of Indian installations.