Subtech LogoSince 1998
AMF Panel for Honda EU70iS, 63 Amp PMC, Three Phase
Honda Authorised Automation Partner

AMF Panel for Honda EU70iS, 63 Amp PMC, Three Phase

Three phase power backup, fully automatic, built for the Honda EU70iS.

Get Best Price
Panel Type
AMF Panel (PMC Technology)
Compatible Genset
Honda EU70iS (5.5 kVA rated / 7.0 kVA max)
Current Rating
63 Amp, Three Phase
Operating Voltage
12VDC control · 130–280 VAC

Subtech's PMC AMF Panel is a 63 Amp, three-phase Auto Mains Failure panel purpose-built for the Honda EU70iS (5.5 kVA rated / 7.0 kVA max) petrol inverter generator. It handles three-phase mains input with single-phase generator output, auto-starting on mains failure and switching back seamlessly when power restores.

What is the AMF Panel for Honda EU70iS?

The Subtech PMC AMF Panel for Honda EU70iS is a 63 Amp, three-phase Auto Mains Failure panel that auto-starts the Honda EU70iS petrol inverter generator (5.5 kVA rated, 7.0 kVA max) on mains failure and auto-stops it when mains power restores. It handles three-phase mains input with single-phase generator output, and is available in 3-Pole and 4-Pole (full neutral isolation) configurations. The 4-Pole version is recommended for hospitals, data centers and other sensitive-load sites.

Key Specifications at a Glance

Quick reference before you scroll through the full spec sheet

Panel Type
AMF (Auto Mains Failure), PMC
Compatible Model
Honda EU70iS
Current Rating
63 Amp
Phase
Three Phase
Operating Voltage
130 to 280 VAC
Control Voltage
12 VDC
Generator Capacity
Up to 7.0 kVA (Honda EU70iS max output)
Configuration
3-Pole or 4-Pole (neutral switching)
Switching Technology
PMC (Pre Magnetic Contactor)
Recommended For
Hospitals, data centers (4-Pole)

Why Choose AMF Panel for Honda EU70iS, 63 Amp PMC, Three Phase?

What actually matters when you put this on your line

PMC Technology

1-second contactor activation eliminates chattering and coil burning, even across the wider 130-280VAC band this panel is rated for.

Sized for the Honda EU70iS

Tested against the Honda EU70iS's full 7.0 kVA max output, not a generic AMF relay repurposed for a bigger genset.

3-Pole and 4-Pole Options

Choose 3-Pole for standard three-phase switching, or 4-Pole for full neutral isolation on sensitive loads.

Three Phase Mains, Single Phase Genset Output

Correctly handles the mismatch between three-phase mains input and the Honda EU70iS's single-phase generator output.

Inbuilt Battery Charger

Keeps the Honda EU70iS starter battery ready so the genset starts reliably on every mains failure.

3 Cranking Attempts

Retries starting at 15-second intervals if the first attempt doesn't catch.

Audio-Visual Fault Alarm

Flags genset faults immediately with both a visual and audible alert.

Rust-Resistant Enclosure

Powder-coated GI box, wall-mounted, compact, built for Indian site conditions.

Description

Built on Subtech's PMC (Pre Magnetic Contactor) technology, the contactor coil energises for just 1 second per switch, eliminating the chattering and coil-burning that plague conventional AMF relays, even across the wider 130-280VAC operating band this panel supports. Available in 3-Pole (line-only switching) and 4-Pole (full neutral isolation, recommended for hospitals and data centers) configurations.

Subtech's PMC AMF Panel is a 63 Amp, three-phase Auto Mains Failure panel purpose-built for the Honda EU70iS (5.5 kVA rated / 7.0 kVA max) petrol inverter generator. It handles three-phase mains input with single-phase generator output, auto-starting on mains failure and switching back seamlessly when power restores.

Additional Information
  • Auto Start and Auto Stop genset on mains failure and restoration
  • Three phase mains input with single phase generator output
  • 4-Pole option gives full isolation of mains and generator supply
  • Inbuilt battery charger keeps genset battery always ready
  • Audio-visual alarm on genset faults
  • Auto and Manual mode with remote operation provision
  • 3 cranking attempts at 15 sec intervals for reliable starting
  • PMC technology, no chattering, no coil burning, smooth switching

Technical Specifications

Capacity63 Amp
PhaseThree Phase
Voltage12VDC, 130-280VAC
For GeneratorHonda EU70iS
Configuration3-Pole / 4-Pole
TechnologyPMC (Pre Magnetic Contactor)
EnclosurePowder-coated GI, wall-mount
Price on request, specifications subject to change without notice.

Who Should Buy AMF Panel · Honda EU70iS?

This product is ideal for the following users and industries

🏭

Industrial Units & Factories

Manufacturing plants needing reliable auto-backup from a petrol generator when mains fail.

🌾

Agricultural & Farming

Farms, dairies and poultry needing critical loads to keep running on Honda gensets without manual switching.

🏗️

Contractors & Builders

Site offices, construction zones and temporary installations needing hands-free backup.

🏢

Commercial Establishments

Hotels, hospitals, offices and shops needing uninterrupted operation during power cuts.

Applications & Use Cases

Where you can use AMF Panel · Honda EU70iS effectively

1

Auto-backup for Honda EU70iS petrol generators

2

Hospitals and data centers (use 4-Pole model for neutral switching)

3

Commercial establishments needing three-phase backup

4

Site offices and remote installations with unreliable mains

5

Generator-mains transfer for mid-size industries

Frequently Asked Questions

Common questions about AMF Panel · Honda EU70iS

What is the warranty on the AMF Panel for Honda EU70iS?

12 months from date of invoice against manufacturing defects, covering all electronic components and the enclosure.

Should I choose 3-Pole or 4-Pole?

3-Pole switches the three line conductors. 4-Pole also switches the neutral, fully isolating mains and generator supplies, the safer option for hospitals, data centers and sensitive electronic equipment.

Can I get a customised version?

Yes, current rating, voltage cutoffs and panel size can be customised for bulk orders. Contact our sales team with your requirement.

What is the delivery time?

Standard models ship within 3-5 working days. Customised panels take 10-15 working days depending on the BOM.

Is installation support available?

Yes. Our service team supports installation through certified electricians across India, plus remote commissioning guidance.

Can I buy this in bulk for a project?

Absolutely. Project / dealer pricing is available for quantities above 10 units. Share your single-line diagram or load list and we will quote within 24 hours.

Downloads

Technical documentation for this model

DatasheetAvailable on request
Wiring DiagramAvailable on request
Installation ManualAvailable on request

Related Products

Related Technical Articles

Applicable Standards & Design Considerations

  • Honda Power Products Authorised Partner: Subtech has been an authorised automation partner for Honda Power Products in India since 2007, designing and testing panels specifically for the EU30iS and EU65iS/EU70iS petrol inverter generator range.
  • IS/IEC 60529: Enclosure ingress protection reference. Subtech's powder-coated GI panel enclosures are built for outdoor/site conditions typical of Indian installations.